Mixing and blending machine setters, operators, and tenders: Salary, Job Outlook, Education and Career Path

Set up, operate, or tend machines to mix or blend materials, such as chemicals, tobacco, liquids, color pigments, or explosive ingredients.

Short answer: Mixing and blending machine setters, operators, and tenders earn a national median annual wage of $48,990 (BLS, May 2025). Employment is projected to change -6.1% from 2025 to 2035 (all occupations: +3.5%), with about 7,900 openings per year. The typical entry credential is high school diploma or equivalent.

Median annual wage
$48,990
May 2025 Verified data
Projected change
-6.1%
2025 to 2035 Official projection
Openings per year
7,900
Average, 2025 to 2035 Official projection
Employment
94,920
OEWS, May 2025 Verified data

Mixing and blending machine setters, operators, and tenders salary

$0$20K$40K$60KUnited States$48,990
National annual wages for mixing and blending machine setters, operators, and tenders, May 2025: 10th percentile $36,790, 25th $42,850, median $48,990, 75th $59,860, 90th $70,200. The bar spans the 25th to 75th percentile, the thin line spans the 10th to 90th percentile, and the red mark is the median.
MeasureAnnualHourly
10th percentile$36,790$17.69
Median (50th percentile)$48,990$23.55
Mean (average)$52,090$25.04
90th percentile$70,200$33.75

These wages describe everyone employed in the occupation, from new entrants to experienced workers. They are not starting salaries and not earnings of graduates from any particular program. Verified data

Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, National. May 2025 reference period. Published April 30, 2026. Retrieved October 18, 2026. Methodology.

Mixing and blending machine setters, operators, and tenders pay by state and metro area

$31.4K$60.8K
Median annual wage for mixing and blending machine setters, operators, and tenders by state, May 2025. Highest: Massachusetts at $60,790. States in gray have no published estimate.
Table: median wage and employment for all 50 states and territories
StateMedian10th pct90th pctEmploymentLocation quotient
Alabama$46,050$34,960$64,4302,2201.72
Alaska$49,740$35,290$75,780600.32
Arizona$48,280$38,320$73,0101,4000.71
Arkansas$44,650$35,670$64,2001,1001.39
California$50,640$38,220$79,3405,7300.52
Colorado$48,520$40,800$62,2606400.36
Connecticut$53,830$42,200$84,9002600.26
Delaware$51,460$39,350$66,5501300.43
Florida$46,000$34,550$59,7803,5500.59
Georgia$47,000$34,790$59,8303,4201.15
Idaho$44,690$37,990$54,8005100.97
Illinois$53,560$39,460$73,72010,2402.75
Indiana$47,650$37,390$66,6004,8402.48
Iowa$51,570$41,550$73,4102,3102.43
Kansas$50,750$36,700$70,6601,3801.58
Kentucky$48,490$37,750$59,8501,6601.36
Louisiana$47,330$32,430$112,4205700.48
Maine$55,540$39,420$80,4302200.56
Maryland$53,480$40,200$70,7707700.45
Massachusetts$60,790$40,640$74,9204200.19
Michigan$44,310$35,370$64,9903,0401.13
Minnesota$59,270$45,610$77,2901,7600.98
Mississippi$46,410$35,420$68,7601,0701.51
Missouri$50,340$39,120$65,2602,8001.56
Montana$38,410$34,570$53,3302800.89
Nebraska$49,050$38,620$61,1009401.51
Nevada$48,460$36,670$64,6406500.69
New Hampshire$51,920$34,150$70,0203100.75
New Jersey$57,810$37,940$75,2402,0500.78
New Mexico$36,980$28,230$63,1403400.63
New York$53,170$36,120$72,5404,3400.73
North Carolina$47,020$36,380$62,7803,4001.13
North Dakota$48,000$39,240$63,5502600.98
Ohio$47,720$37,150$70,8305,2301.54
Oklahoma$47,000$32,710$67,6709600.92
Oregon$50,420$39,060$75,1601,0900.91
Pennsylvania$50,550$38,270$71,5704,3801.18
Puerto Rico$31,410$21,920$47,5706601.16
Rhode Island$47,610$32,820$66,1401900.63
South Carolina$47,740$35,680$64,7002,5601.82
South Dakota$49,000$30,070$58,2505101.83
Tennessee$47,840$36,600$60,8501,6100.8
Texas$45,320$31,110$64,4306,3500.74
Utah$47,180$36,050$70,0401,2901.22
Vermont$45,420$40,680$62,2402801.52
Virginia$49,970$38,800$65,7901,5300.61
Washington$53,800$41,630$91,7702,2701.05
West Virginia$51,020$38,460$66,4203500.82
Wisconsin$52,200$39,900$74,3203,3801.88
Wyoming$58,320$44,350$78,1102101.21

A location quotient above 1 means the occupation is more concentrated in that state than in the nation overall.

Metro areas with the most jobs

Chicago-Naperville-Elgin, IL-IN6,550
New York-Newark-Jersey City, NY-NJ3,430
Los Angeles-Long Beach-Anaheim, CA2,080
Dallas-Fort Worth-Arlington, TX2,070
Houston-Pasadena-The Woodlands, TX1,550
Atlanta-Sandy Springs-Roswell, GA1,470
Cleveland, OH1,190
Phoenix-Mesa-Chandler, AZ1,160
Charlotte-Concord-Gastonia, NC-SC1,150
Philadelphia-Camden-Wilmington, PA-NJ-DE-MD1,110

Highest paying metro areas

Sacramento-Roseville-Folsom, CA$75,790
Duluth, MN-WI$73,210
Wausau, WI$69,080
Fayetteville, NC$67,500
Kenosha, WI$62,470
Joplin, MO-KS$62,460
Bakersfield-Delano, CA$62,390
Minneapolis-St. Paul-Bloomington, MN-WI$61,310
Albany-Schenectady-Troy, NY$61,060
San Francisco-Oakland-Fremont, CA$60,720
Among metro areas with at least 100 workers in this occupation.
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, State. May 2025 reference period. Published April 30, 2026. Retrieved October 18, 2026. Methodology.
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, Metropolitan areas. May 2025 reference period. Published April 30, 2026. Retrieved October 18, 2026. Methodology.

Job outlook for mixing and blending machine setters, operators, and tenders

2025 (actual)97,3002035 (projected)91,400
BLS projects employment of mixing and blending machine setters, operators, and tenders to go from 97,300 in 2025 to 91,400 in 2035, a change of -6.1% (-5,900 jobs). All occupations are projected to grow +3.5%.
  • Average annual openings, 2025 to 2035: 7,900. Openings include new jobs plus replacement needs when workers retire or leave the occupation. Official projection
  • Share of workers who are self-employed (2025): 2.5%.

These are official BLS projections. ConnectPrep does not alter them or present its own forecasts as official statistics.

Source: U.S. Bureau of Labor Statistics, Employment Projections, Table 1.2: Occupational projections, 2025-35, and worker characteristics, 2025. Base year 2025, projected year 2035. Published August 27, 2026. Retrieved October 18, 2026. Methodology.

Education and training for mixing and blending machine setters, operators, and tenders

Typical entry education
High school diploma or equivalent
Related work experience
None
On-the-job training
Moderate-term on-the-job training
O*NET Job Zone
Job Zone 1-2: Very Little to Some Preparation Needed

Highest education of people working in this occupation

Less than high school17%
High school diploma45.4%
Some college, no degree20.8%
Associate's degree6.7%
Bachelor's degree8.3%
Master's degree1.7%
Doctoral or professional0%
Share of workers age 25 and over by highest education completed, 2023-24. The most common level is a high school diploma (45.4%).
Source: U.S. Bureau of Labor Statistics, Employment Projections, Education and training tables 5.1 to 5.4. Attainment 2023-24 (ACS); wages 2025; projections 2025-35. Published August 27, 2026. Retrieved October 18, 2026. Methodology.

O*NET describes this preparation level as: Usually requires a high school diploma or GED, though some occupations may not.

Degrees and programs that lead to this career

Programs officially mapped to this occupation in the NCES and BLS CIP to SOC crosswalk. A mapping means the program commonly prepares students for the occupation, not that every graduate works in it. Official crosswalk

Source: National Center for Education Statistics and U.S. Bureau of Labor Statistics, CIP 2020 to SOC 2018 Crosswalk. CIP 2020 and SOC 2018 taxonomies. Published April 30, 2020. Retrieved October 18, 2026. Methodology.

Skills, knowledge, and daily work

Most important skills

Reading Comprehension3.1
Critical Thinking3.1
Monitoring3.1
Speaking3.0
Active Listening2.9
Writing2.8
Active Learning2.8
Learning Strategies2.6
O*NET importance rating on a 1 to 5 scale.

Most important knowledge areas

Production and Processing4.3
English Language3.0
Mechanical2.8
Public Safety and Security2.7
Mathematics2.6
Chemistry2.6
Education and Training2.4
Administration and Management2.2
O*NET importance rating on a 1 to 5 scale.

Typical tasks

  • Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
  • Read work orders to determine production specifications or information.
  • Observe production or monitor equipment to ensure safe and efficient operation.
  • Mix or blend ingredients by starting machines and mixing for specified times.
  • Stop mixing or blending machines when specified product qualities are obtained and open valves and start pumps to transfer mixtures.
  • Compound or process ingredients or dyes, according to formulas.
  • Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards.
  • Operate or tend machines to mix or blend any of a wide variety of materials, such as spices, dough batter, tobacco, fruit juices, chemicals, livestock feed, food products, color pigments, or explosive ingredients.

Technology skills

  • Microsoft Excel (hot technology)
  • Microsoft Office software (hot technology)
  • Microsoft Outlook (hot technology)
  • Microsoft Windows (hot technology)
  • Microsoft Word (hot technology)
  • SAP software (hot technology)
  • Email software
  • Operational databases

Transferable skills for career changers: Operations Monitoring, Operation and Control, Equipment Maintenance, Troubleshooting, Repairing, Quality Control Analysis.

Common job titles: Batchmaker, Blender, Blending Technician (Blending Tech), Ink Blender, Issuing Operator, Machine Operator, Mixer, Mixer Operator, Operator, Stock Preparation Operator (Stock Prep Operator).

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. ConnectPrep has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications.
Source: National Center for O*NET Development for USDOL/ETA, O*NET 31.0 Database (August 2026 release). Database release 31.0, August 2026; element dates vary by occupation. Published August 25, 2026. Retrieved October 18, 2026. Methodology.

Is it worth it? Model the cost of getting there

Use the ROI calculator to compare the cost of the education this career usually requires against staying on your current path. It starts from the official wage distribution above, and you can change every assumption.

Frequently asked questions

How much do mixing and blending machine setters, operators, and tenders make?

The national median annual wage for mixing and blending machine setters, operators, and tenders was $48,990 in May 2025, according to the BLS Occupational Employment and Wage Statistics program. The lowest paid 10 percent earned less than $36,790 and the highest paid 10 percent earned more than $70,200. These figures cover all workers in the occupation, not only new entrants.

What education do mixing and blending machine setters, operators, and tenders need?

BLS lists high school diploma or equivalent as the typical education needed to enter this occupation, with none of related work experience and moderate-term on-the-job training on-the-job training typically needed to become competent.

Is mixing and blending machine setters, operators, and tenders a growing career?

BLS projects employment of mixing and blending machine setters, operators, and tenders to change -6.1% from 2025 to 2035, compared with +3.5% for all occupations. About 7,900 openings are projected each year on average, including openings from workers who retire or change occupations.

Which states pay mixing and blending machine setters, operators, and tenders the most?

By median annual wage in May 2025, the highest paying states were Massachusetts ($60,790), Minnesota ($59,270), Wyoming ($58,320). Pay differences partly reflect differences in living costs.

Get help planning a path to mixing and blending machine setters, operators, and tenders

No research tool on this site requires your contact details. Share them only if you would like a ConnectPrep advisor to follow up. We never ask for financial information here.